Flower Picks & Sprays
Picks and sprays — the short multi-bloom branches and accent stems that finish a build: dressing wreaths, topping packages, filling corsages, dotting centerpieces. A spray carries a small cluster on a branch; a pick is a single accent on a short stem. Every listing states what the set contains, piece by piece.
Quick answer: Sprays are small branches — 3 to 7 blooms on one wired stem, 8 to 18 inches — for filling gaps and trailing; picks are single accents on 4–8 inch stems for placing color. A 22-inch wreath takes 11–12 picks or 6–8 sprays; pieces run $3.50–8.00 each with pack tiers below (October 2026, USD). Rule: sprays fill, picks place.
The 30-Second Pick & Spray Rundown
- Wreath dressing math: one pick per ~6 in. of circumference you want dressed — a 22 in. wreath takes roughly 11–12 picks for a full run.
- Sprays run 8–18 in. with 3–7 blooms or buds per branch; picks run 4–8 in. with a single accent head.
- Both forms are wired — cut to length, bend to face, glue or wire into place.
- Price band: $3.50–8.00 per piece, less at pack tiers; free US shipping over $200.
How to Choose Picks & Sprays
- Pick or spray?
A spray is a small branch — 3–7 blooms or buds along one wired stem, 8–18 in. long — for filling gaps and trailing from arrangements and wreaths. A pick is a single accent on a short 4–8 in. stem — one berry cluster, one rose bud, one velvet leaf — for dotting color precisely. Rule of thumb: sprays fill, picks place. Most builds buy both, and the sets state their piece counts so the fill/place arithmetic closes at purchase.
- What are you finishing?
Wreaths: berry and bud picks on the frame, one spray per join to blur the base — a 22 in. wreath takes 11–12 picks for a full run or 5–6 for accent clusters. Corsages and boutonnieres: single mini-carnation and bud picks as accents. Packages and cake work: short satin-flower picks. Centerpieces: sprays to trail over the container rim. The form exists because finish work is 20% of the material and 80% of the look.
- How do they attach?
Both forms are wired: bend the stem to face the viewer, then wire or hot-glue at the entry point. On wreath frames, tuck pick stems into the base layer's binding before gluing — the wire holds position while the glue sets permanently. For fabric items (crowns, hats), floral tape over the wire before stitching. The wire in every listing is stated (wired stems throughout this line), because attachment method is a buying decision, not a surprise.
- Berries, buds or blooms?
Texture layer by layer: bloom sprays repeat the main flower at smaller scale (cohesion); bud picks add the about-to-open read that makes builds look alive rather than stamped; berry and seed picks add the organic scatter that breaks up flower walls. A working ratio from wreath makers: roughly 60% bloom-type, 25% bud, 15% berry per finished piece. Materials are listed per product — fabric blooms, PE berries on wire, foam buds — so the layers can be planned by hand-feel as well as by look.
- How many should you buy?
Finish math from real builds: a fully dressed 22 in. wreath consumes 11–12 picks or 6–8 sprays; a corsage 1–2 accents; a centerpiece 2–3 sprays. A wedding's worth of finish work — twelve centerpieces, four corsages, two wreaths — lands around 40–60 pieces, which is the pack-tier range (sets print their counts). The buffer rule holds: 10% extra, because picks are the pieces that get re-positioned until the build is right.
Finish math in one line
Finish math from real builds, in one line: a fully dressed 22 in. wreath consumes 11–12 picks or 6–8 sprays; a corsage takes 1–2 accents; a centerpiece 2–3 sprays; and a wedding's worth of finish work lands around 40–60 pieces — the pack-tier range. The buffer rule holds at any scale: 10% extra, because picks are the pieces that get re-positioned until the build is right. For builders who want the arithmetic done for them, the wreath and flower DIY kits pair a build's parts with its instructions.
Frequently Asked Questions
What is the difference between a floral pick and a spray?
Size and structure. A spray is a small branch: 3–7 blooms or buds arranged along one wired stem, 8–18 inches long — it fills gaps and trails. A pick is a single accent on a short 4–8 inch stem — one berry cluster, one bud, one leaf — it places a point of color precisely. In finish work the division of labor is clean: sprays fill, picks place. Both are wired, both cut and bend for attachment, and both forms state their piece counts per set so a build's finishing arithmetic closes before checkout.
How many picks does a wreath need?
For a full dressed run, roughly one pick per 6 inches of circumference: an 18 in. wreath takes 9–10, a 22–24 in. wreath 11–13, a 30 in. wreath 15–16. Accent-cluster styling (three or four cluster zones instead of a full run) drops that to 5–6 picks on a standard wreath — the difference between a garden-full look and a structured one. Sprays trade at roughly two picks per spray where the join points need blurring. Berry and bud accents layer on top at 3–4 per wreath. The counts are worth doing once: finish material is cheap per piece and annoying to run short of mid-build.
How do you attach picks to a wreath?
Three methods by build weight: tuck-and-wire for wreaths that will be re-dressed (bend the pick's stem, tuck it into the base layer's binding, wrap with floral wire — removable later); hot glue at the entry point for permanent builds, holding until set; and zip-tie or floral-wire lash for heavy berry picks on metal frames. The wire in every pick is the attachment mechanism — bend to face the viewer first, attach second, because a correctly-faced pick needs no do-over. A 60-second attachment demo is linked on the product pages, the same as the boutonniere line.
Can picks and sprays be used on wedding cars and packages?
They are the standard material for both, with method notes. Packages: short-stem picks with the wire wrapped in ribbon or taped (bare wire can catch wrapping paper); a satin bloom plus a berry pick is the classic two-piece topper. Wedding cars: picks and sprays attach via suction cups, magnetic bases or ribbon ties to door handles — never adhesive directly on paint; a spray on a suction cup at each door handle photographs well and removes clean. The same wired construction that makes picks positionable on wreaths makes them re-arrangeable on a car between photos.
What are berry and bud picks made of?
Listed per product, by part: berry clusters are typically PE or foam beads on wired stems (the stated material matters for outdoor use — PE beads shed water, foam berries soften in prolonged damp); buds are foam or fabric; leaves are fabric or PE film, wired. The line's disclosure rule applies at the smallest scale: every pick states its head material because the layers of a finished build mix materials by design, and knowing which is which is what lets a maker plan hand-feel and weather exposure. The sample box carries representative pieces of each material family if the differences need a hand check first.